<img height="1" width="1" alt="" style="display:none" src="https://www.facebook.com/tr?id=547912885342136&amp;ev=PixelInitialized">
(973)529-836083 State Route 23 NorthHamburg, NJ 07419
3 min read

2007 Ford E450 Box Truck $12,000

May 3, 2019 1:11:53 PM

Specifications

Capacity

  • Empty weight: 7,860 lbs.
  • Gross vehicle weight: 14,050 lbs.
  • Cubic capacity: 669 cu. ft.
  • Hitch rating: 10,000 lbs.
  • Payload: 6,190 lbs.

Features

  • Air Conditioning
  • AM / FM Stereo
  • Tire size: LTX225/75 R16E
  • Power brakes: Hydraulic, 4 wheel disc AntiLock
  • Estimated mile/gal: 11 miles/gal
  • Fuel tank capacity: 37 gal
  • Power outlet on dash: 12 volt
  • 115 AMP Alternator
  • Tinted Glass, Tilt Steering
  • Dual Air Bags
  • Power Steering / Interval Wipers
  • Sealed Beam Halogen Headlight
  • Heavy duty front springs, front and rear stabilizer bars
  • Heavy Duty Shock Absorbers
  • Xtra Heavy Duty Twin I-Beam Front Axle
  • Dual Bucket w/ Jump Seat

Fuel

  • Engine: 6.8 L V-10 / Gas engine
  • Transmission: 5 speed overdrive
  • Differential: Heavy Duty Dana 4.56 Gear Ratio
  • Auxiliary Transmission Oil Cooler
  • 50 State Emissions

Dimensions

  • Box roofline: 14'
  • Box floor inside: 10' 9"
  • Box inside width: 7' 7"
  • Box inside height: 7' 2"
  • Box outside width: 8'
  • Box deck height: 32"
  • Wheelbase: 158"
  • Rear door opening height: 6' 8"
  • Rear door opening width: 6' 6"
  • Loading ramp length: 10'
  • Loading ramp inside width: 25"
  • Loading ramp width: 27"
  • Bumper to bumper length: 21' 6"
  • Top to ground height: 11'
  • Rear Roll Up Door
Topics: Ford 2007 Box Truck
Bill DeBoer

Written by Bill DeBoer

William J. DeBoer (Bill Jr.) is Co-owner and Vice President at DeBoer’s Auto. As the company’s General Manager, Bill has been responsible for bringing innovations in daily operations to the full-service, high-tech auto repair facility for 20+ years. Passionate about computers from an early age, Bill’s interest in technology gravitated to cars while he was in college. By obtaining a Certificate in Automotive Technology followed by a B.S. in Business Management from Penn State, Bill was able to fuse his interests into a car technology specialization and join the family business shortly thereafter.